Transferring Your Smashpot to Another Fork: Parts Required

If you're thinking of moving your Smashpot to a different fork, follow this checklist to ensure you have the correct fitting parts for your fork:

1. Is the Smashpot compatible with the new fork?

You can see the full compatibility here.

2. Is the new fork a different brand to what the Smashpot was in previously?

 
Example: 

If it's moving from a Fox 36 to Fox 38, no Footstud is needed.
If it's moving from a Fox 36 to a Rockshox Zeb, a new Footstud is needed.

3. Is the new fork a different model to what the Smashpot was in previously?

 
Topcaps Available:

 
Example: 

If it's moving from a Rockshox Yari to Rockshox Lyrik, no Topcap is needed.
If it's moving from a Fox 36 to Marzocchi Z1, no Topcap is needed. 
If it's moving from a 2018 Fox 36 to a 2020 Fox 36, no Topcap is needed.
If it's moving from a Rockshox Lyrik to a Rockshox Zeb, a new Topcap is needed.

4. Do you wish to change the travel?

Example: 

If you are the original owner and would like to go from 160mm to 170mm, you will need to re-apply the "Cartridge Tube Heat Shrink".

If you are purchasing a used unit, and don't have the original spare parts, you may require additional parts from the "Travel Adjust Kit" + "Cartridge Tube Heat Shrink" to change travel.

5. Do you wish to change the spring rate?

Please check the Spring Rate Calculator here.